Author Guidelines
- Submission Requirements
Authors submitting manuscripts to UZJEST must observe the following requirements:
- Originality: Submitted manuscripts must present original research and provide new and valuable information in engineering or technology. Manuscripts should not have been previously published.
- Scientific Quality: Research must be based on an appropriate methodology and demonstrate accurate, logical, and scientifically sound analysis.
- Relevance: Manuscripts must fall within the journal's scope and demonstrate scientific value, innovation, or practical relevance.
- Author Approval: All listed authors should have reviewed and approved the manuscript and its submission to the journal.
- ORCID iD: A valid ORCID iD is mandatory for every author. All authors must register for an ORCID account and provide their ORCID iDs with submission. The corresponding author is responsible for ensuring that the ORCID information for all co-authors is complete and accurate.
- Journal Template: Authors must prepare their manuscripts using the official UZJEST template. Separate templates are available for English and Arabic manuscripts.
- References: All citations and references must follow the journal's numbered referencing system and the reference-format examples provided in the official template.
- Research Integrity: Authors must ensure that their work is presented honestly, with appropriate acknowledgment and citation of all sources.
Manuscripts that do not comply with the journal's requirements may be returned to the authors for correction before further editorial consideration.
- Manuscript Preparation
Authors may submit manuscripts written in English or Arabic. Regardless of the language of the main manuscript, the title, authors' names and affiliations, abstract, and keywords must be provided in both English and Arabic.
Authors must use the appropriate official template:
- English manuscript: UZJEST English Template.
- Arabic manuscript: UZJEST Arabic Template.
The manuscript should be carefully prepared according to the formatting and structural requirements described below.
2.1. Title and Author Information
The manuscript must begin with a clear, concise, and informative title that reflects the main subject of the research.
The following information must be provided:
- Full names of all authors.
- Department, faculty, university or institution, city, and country for each author.
- A clear indication of the corresponding author.
- The corresponding author's email address.
- The ORCID iD of every author.
Author names and affiliations must be presented in both English and Arabic. Authors should ensure that their names and institutional affiliations are written consistently throughout the manuscript and submission information.
2.2. Abstract
Each manuscript must include an abstract in both English and Arabic. Each abstract should not exceed 250 words.
The abstract must be:
- Self-contained and free of references and citations.
- Written as one continuous paragraph.
- A concise statement of the research purpose, principal results, and major conclusions.
- Written without subheadings, numbered items, or bullet points.
- Clear and understandable, avoiding uncommon or non-standard abbreviations. Any essential abbreviation must be defined at its first occurrence in the abstract.
The English and Arabic abstracts should convey the same scientific information.
2.3. Keywords
Authors must provide 3–5 keywords in both English and Arabic. Keywords should accurately represent the main topics and subject areas of the manuscript and should be suitable for indexing and retrieval purposes.
- Manuscript Structure
The manuscript should be organized logically and contain the sections appropriate to the research. Authors should follow the structure in the relevant language template.
3.1. Introduction
The Introduction should provide the background and context of the research problem. It should explain the importance of the study, identify the research problem, and present the objectives or hypotheses of the work.
Authors should discuss relevant previous studies and include recent references to establish the research background and demonstrate the contribution of the present work. The Introduction should be concise and should avoid an unnecessarily extensive literature review or a summary of the results.
3.2. Materials and Methods / Practical Aspect and Methodology
This section should provide sufficient information about the methods and procedures used to conduct the research so that the work can be understood and, where appropriate, reproduced.
Depending on the nature of the study, this section may include:
- Experimental procedures and research methods.
- Materials, equipment, instruments, and measurement techniques.
- Mathematical, numerical, and statistical methods.
- Data collection procedures and sample characteristics.
- Software, simulation tools, and computational techniques.
- Relevant modifications to previously published methods.
Previously published methods should be supported by appropriate references. Only the details and modifications relevant to the present study need to be described.
3.3. Theory and Calculation
Where applicable, a separate Theory and Calculation section may be included. The theoretical discussion should extend the background presented in the Introduction and provide the scientific foundation for the research. Calculations should explain the practical application or development of the theoretical principles.
Mathematical equations and symbols should be inserted using the Microsoft Word Equation Editor. Equations should be clearly presented and numbered consecutively when they are referred to in the text. Appropriate references should be provided for equations or mathematical methods adopted from previous studies.
3.4. Results and Discussion
This section should present the principal findings of the research and provide a clear scientific interpretation of their significance.
Results may be presented using tables, figures, photographs, or graphs, as appropriate. The discussion should explain the meaning of the findings, compare them with relevant previous studies where appropriate, and address their implications and potential applications.
Authors should avoid simply repeating numerical results in the discussion. The analysis should be objective, logical, and supported by the presented data.
The Results and Discussion sections may be presented separately or combined, depending on the nature of the research.
3.5. Figures and Tables
All figures and tables must be embedded in appropriate positions within the manuscript and cited in the text in consecutive numerical order.
Figures:
- Figures must be numbered consecutively (Figure 1, Figure 2, etc.).
- Each figure must have a descriptive caption placed below it.
- Figures should have a minimum resolution of 300 dpi, unless a lower resolution is scientifically justified.
- Bitmap formats such as TIFF, JPEG, and other suitable image formats may be used.
- Figures must be clear and readable, including all labels, symbols, and numerical values.
- Where bitmap images contain labels, the template recommends keeping the image and labels in separate layers.
Tables:
- Tables must be numbered consecutively (Table 1, Table 2, etc.).
- Each table must have a descriptive title placed above it.
- Tables should be prepared using the Microsoft Word table tool.
- Numerical measurements must include their units in the relevant column headings.
- All tables must be cited in the manuscript text.
Figures and tables that are not numbered or referred to in the text may be omitted during publication preparation.
3.6. Conclusions
Every manuscript must include a Conclusions section. It should summarize the main outcomes of the research and explain their scientific importance and relevance.
The Conclusions section should be written in continuous prose and may address:
- The principal findings and contributions of the research.
- The significance and potential applications of the results.
- The advantages and limitations of the study.
- Recommendations and possible directions for future research.
Conclusions should be based on the results and discussion presented in the manuscript. They should not introduce new results or contain unnecessary repetition. Subheadings and bullet-point lists should not be used in this section.
For Arabic manuscripts, the corresponding section may be titled Conclusions and Recommendations (الخاتمة والتوصيات), in accordance with the Arabic template.
3.7. Acknowledgment
Acknowledgments, if applicable, should be presented in a separate section before the References. Authors may acknowledge individuals who contributed to the research but do not qualify for authorship, as well as institutions, supporting organizations, grants, and other forms of assistance.
The full official names of funding agencies should be provided.
3.8. Conflict of Interest
Authors must disclose any actual or potential conflicts of interest that could influence the research or its publication.
If no conflict of interest exists, authors may use the following statement:
“The authors declare that there is no conflict of interest regarding the publication of this paper.”
- Formatting Requirements
All manuscripts must be prepared using the appropriate UZJEST template. The formatting requirements differ between the English and Arabic templates and should be followed accordingly.
4.1. English Manuscript Formatting
The English manuscript must follow these specifications:
|
Element |
Formatting requirement |
|
Page size |
A4 (21 × 29.7 cm) |
|
Layout |
Single column |
|
Top margin |
2.5 cm |
|
Bottom margin |
2.5 cm |
|
Left margin |
2.5 cm |
|
Right margin |
2 cm |
|
Article title |
Times New Roman, 16 pt, bold, centered |
|
Main headings |
Times New Roman, 11 pt, bold, left aligned |
|
Subheadings |
Times New Roman, 11 pt, bold italic, left aligned |
|
Main text |
Times New Roman, 11 pt, justified |
|
References |
Times New Roman, 10 pt, justified |
|
Line spacing |
1.15 throughout |
The journal will assign and format the final page numbers.
4.2. Arabic Manuscript Formatting
The Arabic manuscript must follow the specifications in the official Arabic template:
|
Element |
Formatting requirement |
|
Page size |
A4 |
|
Margins |
2.5 cm on all sides |
|
Font |
Simplified Arabic |
|
Main text |
12 pt, regular |
|
Headings |
14 pt, bold |
|
Line spacing |
Single |
|
Maximum length |
20 pages, including figures, tables, and references |
Scientific terms may be written in English in parentheses alongside their Arabic equivalents. The English terms should use Times New Roman.
Authors should pay particular attention to Arabic spelling, grammar, punctuation, and right-to-left text alignment.
- References and Citation Style
UZJEST follows the IEEE reference style. References must be listed individually at the end of the manuscript in the order in which they are first cited.
The following examples illustrate the required reference formats.
Journal article:
[1] Author 1, A.B.; Author 2, C.D. Title of the article. Abbreviated Journal Name, Year, Volume, pages.
Book chapter:
[2] Author 1, A.; Author 2, B. Title of the chapter. In Book Title, 2nd ed.; Editor 1, A., Editor 2, B., Eds.; Publisher: Location, Country, Year; Volume, pp. 154–196.
Book:
[3] Author 1, A.; Author 2, B. Book Title, 3rd ed.; Publisher: Location, Country, Year; pp. 154–196.
Unpublished work:
[4] Author 1, A.B.; Author 2, C. Title of unpublished work. Abbreviated Journal Name, Year, publication status (submitted, accepted, or in press).
Personal communication:
[5] Author 1, A.B. (University, City, Country); Author 2, C. (Institute, City, Country). Personal communication, Year.
Conference paper:
[6] Author 1, A.B.; Author 2, C.D.; Author 3, E.F. Title of presentation. In Proceedings of the Conference Name, Conference Location, Country, Day Month Year.
Master's thesis:
[7] Author 1, A.B. Title of thesis. Master's Thesis, Department, University, Location, Date of Completion.
Doctoral dissertation:
[8] Author 1, A.B. Title of dissertation. Ph.D. Dissertation, Department, University, Location, Date of Completion.
Website:
[9] Title of Website. Available online: URL (accessed on Day Month Year).
Authors must ensure that all references are accurate, complete, and cited appropriately in the text and should follow the examples in the UZJEST templates when preparing their reference lists.
- ORCID iD Requirement
A valid ORCID iD is mandatory for all authors submitting manuscripts to UZJEST. Each author must have an individual ORCID account and provide their ORCID iD as part of the submission information.
The corresponding author must ensure that:
- Every co-author has a registered ORCID iD.
- The ORCID iDs are correctly associated with the respective authors.
- Author names and ORCID records are accurate and consistent.
- The ORCID iD of each author is supplied with the manuscript submission.
Manuscripts submitted without ORCID iDs for all authors may be returned to the corresponding author for completion before editorial processing.
ORCID iDs help distinguish researchers with similar names, improve author identification, and support the discoverability and attribution of scholarly publications.
- Plagiarism and Research Integrity
UZJEST is committed to maintaining academic integrity and originality in scholarly publishing. All submitted manuscripts are screened using plagiarism-detection software.
The maximum permitted similarity index is 25%, excluding references. Manuscripts exceeding this threshold may be returned to the authors for revision or rejected.
Authors should ensure that:
- All sources, ideas, and materials obtained from other works are properly acknowledged.
- Direct quotations and reproduced material are appropriately cited.
- The manuscript contains original writing and analysis.
- Reuse of material from the authors' previous publications is minimized and properly acknowledged.
- Figures, tables, and other third-party materials are used with the necessary permissions where applicable.
A similarity score below the permitted threshold does not automatically establish that a manuscript is free from plagiarism. The editorial team may consider the nature and context of matching material when assessing a submission.
- Peer-Review Process
UZJEST adopts a double-blind peer-review process through the Open Journal Systems (OJS) platform. The identities of authors and reviewers are concealed from each other throughout the review process.
The editorial process generally includes the following stages:
- Submission and Initial Screening: The editorial team checks the manuscript's suitability for the journal's scope, its compliance with the author guidelines, originality, and adherence to publication ethics.
- Assignment of Reviewers: Manuscripts that pass the initial screening are assigned to qualified reviewers with relevant expertise. At least two independent reviewers are normally invited.
- Peer Review: Reviewers evaluate the manuscript's scientific quality, originality, methodology, analysis, results, and contribution to the relevant field.
- Editorial Decision: Based on the reviewers' reports and the editor's assessment, a decision is communicated to the corresponding author.
- Revision: When revisions are requested, authors must address the reviewers' comments and submit a revised manuscript with a detailed response explaining the changes made.
- Final Decision and Publication: Following evaluation of the revised manuscript, the editor makes the final decision. Accepted manuscripts proceed to copyediting and publication.
Possible editorial decisions include acceptance, acceptance subject to minor revisions, major revision and further evaluation, or rejection.
- Submission Procedure
Manuscripts should be submitted through the journal's online submission system using Open Journal Systems (OJS), in accordance with the instructions provided by the journal.
Authors should prepare the following before submission:
- The complete manuscript prepared using the appropriate UZJEST English or Arabic template.
- Full author names, affiliations, and email information.
- ORCID iDs for all authors.
- English and Arabic titles, author information, abstracts, and keywords.
- A complete and correctly formatted reference list.
- The Publication Request Form, as required by the journal.
Important notice regarding account creation: Online registration is currently suspended due to technical reasons. Authors wishing to submit a manuscript should contact the journal by email to request account creation and submit the Publication Request Form as instructed by the editorial office.
- Publication and Copyright
UZJEST is an open-access journal. All published articles are licensed under the Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0).
This license permits users to share and redistribute published material for non-commercial purposes, provided that appropriate attribution is given and the license terms are respected.
The journal uses Digital Object Identifiers (DOIs) to support the persistent identification, citation, and discoverability of published articles. The DOI prefix of UZJEST is: 10.26629/uzjest
Accepted manuscripts are published online as soon as they are ready and are subsequently compiled into the journal's regular issues.
- Contact Information
For questions concerning manuscript preparation, submission, or the editorial process, authors may contact the journal:
University of Zawia Journal of Engineering Sciences and Technology (UZJEST)
University of Zawia, Zawia, Libya
Editor-in-Chief: Prof. Dr. Abdulhafid M Elfaghi
Email: jet@zu.edu.ly
WhatsApp: +218 91 367 1983
Journal Website: https://journals.zu.edu.ly/index.php/UZJEST